Soft sides for the bed are made of sinteponovogo material or foam. A layer of this material is rolled up into tubes and fastened together so that the resulting structure is stable and indestructible. By adjusting the number of rollers stacked on top of each other, sides of different heights are made.
In order for such limiters to always look clean and tidy, they sew covers on a removable snake. The covers are machine washable, ironed and put on again on the foam rollers. This will help to always keep the bed clean and the room beautiful.
In order to keep this design well on the bed, foam rollers, fastened together, are attached to the mattress. For this, homemade ties, buttons or sewn zippers are used. Another easy-to-do mounting option made by yourself is a sewing-on Velcro on the bed rest and on the mattress. Velcro fastening is one of the most reliable, but at the same time easy to use and operate methods for attaching foam boards to the mattress.
Grid
A bed limiter made of mesh material is used for cots if the child is no longer too small and sleeps separately from their parents. The net should be very strong and withstand the child if he rests with all his weight on it during sleep. For reliable fastening of such protection, prepare the frame for the mesh and securely fasten it. The frame is made of wooden battens or metal stops. The restraints themselves soften by putting on them fabric covers or foam pillows.
This barrier for a crib allows the child to see what is happening in the room. Due to the breathability of the mesh-like material, fresh air has free access to the baby’s bed, which makes his sleep safer, healthier and stronger.
Plastic
There are two types of plastic protective barriers for a bed:
- Purchased,
- Made by yourself.
The sides made of plastic have a sufficiently high strength, combined with the low weight of the protective installation itself. Commercially available plastic stops have an original set of necessary accessories for fixing the system to the bed.
In the manufacture of such a system, you can independently use improvised material, such as plastic pipes for plumbing. They are very easy to fasten together, and thus create a side with vertical rails. The height of the slats is regulated depending on the needs and desires, the width of the holes between the rails - depending on the intended purpose of the side. The plastic barrier on the bed for children is very light, and there is no need to wear soft covers on it. But if such a barrier for the bed is made of plumbing pipes, for ethical reasons, it is covered with a cover or thin blanket.
Price for bed restraints in Balashikha
You can buy bed restraints in Balashikha at the most affordable prices, using our website. Full specifications, detailed photographs, as well as the ability to compare will allow you to make the most successful purchase. On the pages of our catalog you will find all online stores with addresses and reviews that can help you make the right choice when buying bed restraints. You can also find online online stores selling bed restraints in bulk.
234 156 404 offers from 24 812 stores. Updated 04.15.2020 at 18:15 Moscow time.
Main varieties
Stationary side-limiters have curly cuts that are used by kids as an emphasis, allowing you to climb into the crib without the help of adults
For very young children, a barrier completely covering the side of the bed is recommended. In addition, it should be high enough so that the child could not roll over or climb over it. For older children, a small limiter is enough, the purpose of which is to prevent an accidental fall in a dream. Such barriers usually cover only part of the length of the bed, often for convenience they are made to fall.
A removable child restraint for a bed is considered an ideal solution for arranging a berth
A common option is a removable limiter for a child, which is convenient to dismantle when it becomes unnecessary. Such a removable barrier will also be indispensable if you have a trip with young children - you can easily take it with you and install it on any child or adult bed.
A built-in side limiter for a crib is purchased with the rest of the children's furniture
Depending on the material of manufacture, several types of protective sides are distinguished.
- Soft - the simplest design will be a barrier of foam rubber or synthetic winterizer rolled into tubes. The resulting rollers are fastened together, gaining the required height of the side. For more convenient care and an aesthetic appearance, removable covers can be sewn on such a limiter, which can be machine washed. Such structures are usually fastened with Velcro or ties to the bed mattress.
Beautiful soft side for a girl’s bed
Protective mesh on a metal frame
The limiter barrier for a children's bed from plastic pipes
Wooden side for a baby bed
Metal side limiter for loft bed
It’s quite simple to make a barrier of any kind on your own, it will not require large economic costs, and it will serve no less reliably than a purchased one.
Unusual budget limiter made by yourself
Do-it-yourself wooden stopper
DIY bed restraint
Even if there is no extensive experience in carpentry, it is not difficult to make a simple structure barrier. Before starting work, you should choose the type of fastening - the simplest involves screwing the holder to the side of the bed. This will save materials and time, but it does not look too aesthetically pleasing, and the side of the bed will be damaged.
Baby bed limiter is easy to install and securely fastened
The second way is to make holders that will be attached to the bottom of the bed and covered with a mattress on top. This option is more convenient, but the possibility of its implementation depends on the design of the bed.
For work you will need the following materials and tools:
- strong wooden slats,
- hacksaw
- bolts or screws
- screwdriver
- roulette or ruler,
- paper and pencil for drawing.
DIY tools for making a side
To make a simple p-shaped side (bolted), you need fairly short slats - the length of the barrier is 55cm. The height of the limiter is made at will, for a removable model, a height of 15-30 cm is sufficient.
Short Barrier Example
Stages of work are performed in a specific order.
- A drawing is made on paper taking into account all the calculations.
Baby bed restraint diagram
Assembly racks - sidewalls with designated places for securing the sides
Fixture of the sides of the future bed with racks
DIY Bed Restraint
Wave-shaped crib stop
Dressing
Homemade stopper with removable fabric cover
The limiter made of wood looks aesthetically pleasing, it is enough to polish or paint with varnish so that there is no risk of getting a splinter. If plywood or chipboard was used, the side must be decorated. Soft cladding or case is best suited. If you lay a synthetic winterizer on the inside, the child will be protected from accidental blows in a dream.
Cloth drop guard
The limiter can also be coated with special paint for wooden surfaces.
Do-it-yourself wooden wood barrier for bunk beds
Features
The bed restraint is a protective barrier to prevent a person staying on the bed from falling. Such devices are built-in, that is, the design of the bed in advance provides for the presence of such a barrier. Also, the limiter can be purchased separately if you have such a need. It is clear that their color variations are also diverse. You can also choose the material from which the product is made based on your tastes and preferences.
Varieties
Choosing a limiter for the bed, you should be based primarily on the age of the child. If this is a child of the first year of life, the barrier must certainly be high so that standing on his feet, he could not get over it.
As a rule, cots designed for very young children are always equipped with an already built-in barrier. There are cribs equipped with a universal limiter that can be adjusted in height. The minimum height can be selected if the child is constantly in a lying position, that is, for infants. The middle position is suitable for a child who has learned to sit.. And if there is a chance that the child can stand on his feet, you must definitely choose the maximum height.
Also, young children have another problem. Since the built-in limiter, as a rule, is a series of vertical slats, very often the arms and legs of the babies fall between them, which leads to pain and sometimes injuries. In this case, a soft border is also needed to prevent such unpleasant situations. It is attached around the perimeter of the crib and very often comes with it.
For older children, who are between the ages of about three years, you can already choose low limiters to prevent them from falling during sleep.
It is worth noting that this age can be more, since it all depends on the individual characteristics of your child. Currently popular loft beds are almost always equipped with such a protective device. It happens that teenage beds have sides, but this is, rather, a decorative element. Therefore, they are often not located around the perimeter of the bed, but in one part of it.
Removable stops are convenient in that they can also be installed on an adult bed. For example, if a baby came to visit you, but there is no crib, you can use removable stops. However, it is worth noting that this option will not work if the baby is very small and does not know how to get out of bed or sleeps restlessly. In this case, a bed with built-in barriers around the perimeter of the bed is better.
Removable restraints are usually installed only on the part of the bed, which is why they are suitable for older children - approximately for three years of age and older. Moreover, if the baby has a habit of moving to the parent's bed, such an adaptation is still better to have in the arsenal.
Dimensions
If we talk about the size of the side, then this question depends on the age of the child. Young children, as noted above, need high limiters. So, for a bed with a size of 70x120 cm, a side with a height of 70 cm will be optimal.
Older children need curbs in order not to fall during sleep.
The size of the bed for children of this age is 70-95x150 cm. The optimal size of the limiter in this case is up to 30 centimeters.
A large child, in principle, does not need a limiter. As a rule, these are teenagers, and the border on their bed, rather, carries a certain design idea. For such children, beds up to 200 centimeters in length are purchased and the side usually occupies no more than a third of the bed.
Color schemes
On taste and color, as they say, there is no companion. The color scheme of the limiter for the bed, as a matter of fact, and the bed itself, depends entirely on the flight of your imagination, since there are a great many of them on the market. But parents traditionally prefer to get pink for the girl, and blue for the boy. Also, designers recommend starting from the general style of the room and the color of the main furniture so that the acquisition does not get out of the general design idea of the room.
Overview of the best manufacturers
Bed limiter Summer infant Suitable for children from one and a half to six years and prevents the child from falling during sleep. The device is easy to assemble, without the need for any tools. The size of the side is 108x53 centimeters and is suitable for mattresses of 70-90x140-190 cm in size. The advantage of this limiter is the possibility of folding it down. The price of such a device is approximately 3300 rubles.
Bed restraints Tomy presented in pink and blue. The barrier is sheathed with soft cloth so that the child does not get hurt when it comes into contact with it. The limiter is installed under the mattress, the width of which should be from 70 to 90 centimeters. The barrier is held in place by the weight of the mattress and the sleeping one, at the other end has a bend of 7 centimeters to prevent slipping from under the mattress. In the pocket located on the barrier, the child can put his favorite toy. If desired, it can be folded down to free access to the child. The price of such a device is approximately 3000 rubles.
The compact size when folded has a side stop Babies and suitable for lovers of traveling with a child. The size of the device is 140 x 50 centimeters and is suitable for children aged three to five years. Such a barrier is fastened over the mattress with the help of a unique fastening system, due to which it is removed very quickly. The striking design of such a side will appeal to most peanuts.
Soft side Baby nice made of cotton material. The periotex filler used in this product is an environmentally friendly material. The product serves to protect the baby's arms and legs from slipping between the crib rails and from drafts.
How to fasten?
The flanges on the market are completely different both in appearance and in the way they are attached. The simplest mounting options involve holding the stopper using the weight of the mattress itself and the weight of the person sleeping on it. As a rule, these are metal tubes, one or two, which are installed under the mattress. At the end, the arc has a bend of about 10 cm. It is needed to prevent the barrier from slipping out from under the mattress.
In other cases, the restraints are attached to the king of the bed.
It is clear that such models of limiters are suitable for wooden beds, in which the drawers are higher than the berth. Such limiters are mainly fastened with bolts, during rotation of which the barrier strips installed on one or the other side of the drawer are compressed. It is necessary to rotate the bolt until the compression of the slats ensures a stable position of the limiter.
Other options for fasteners imply a complete encirclement of the mattress. There are barriers that are installed on top of the mattress.
The fastening of the soft borders occurs with the help of ordinary ties or Velcro.
How to do it yourself?
If the design of your bed does not provide for a side, but you still need it, you can not resort to buying it, but make it yourself. Moreover, this is a rather amusing and not so laborious business. And your child will always remember such care.
To make a wooden barrier, you will need: four slats, planks or curly blanks straight from the inside and two long wooden blanks. It is clear that the four workpieces must be the same and sufficiently strong, because they will bear the entire weight of the product and with their help the limiter will be attached to the bed.
So that such mounts do not scratch the surface of the bed and do not slip, you can and even need to rubberize them from the inside. Two workpieces are attached perpendicular to one long rail, and two to the other. Thus, you get two p-shaped products. These two products must be fastened together with bolts and put on the king of the bed. Screwing in the bolts must be continued until the compression of the two halves of the limiter does not ensure its stable position.
If you have in your arsenal a tool for cutting plastic pipes, as well as the pipes themselves, you can easily make your own version of the limiter. To do this, you will need 8 tubes of the same size, which will provide the height of the barrier and 14 tubes, the size of which depends on the distance you want to get between the rails, 12 T-shaped corners and 4 L-shaped. Such a product is assembled quite easily and quickly, as a designer. Such a limiter will not have sharp corners. If desired, it can be sewn with a soft cloth.
You will learn more about how to make a bed restraint with your own hands from the next video.
A budget manufacturing option is to manufacture a barrier from pipes.
And if you need a high barrier, you can fold the pipes into several floors with ordinary tape. Under the mattress, such a stopper is fixed with strong tapes. The advantages of the product are the budget option, it can be easily washed, the design itself is very light, assembly will not be difficult, soft sides do not injure the child.
If your child is very small and you need a soft border around the perimeter of the crib, in order to avoid injuring the baby’s arms and legs, you must give preference to natural fabrics that will not cause the baby’s allergies. The size of the fabric should match the size of the sides of the crib. As a filler, you can use sintepon. This way you get thin pillows that match the width and length of the bed. They are fastened with ties or Velcro, which must be provided for in advance in the design of the side.
Reviews
Soft side Baby nice consumers consider it necessary when a small child is born. According to reviews, the material from which the board is made is pleasant to the touch. Consumers also like the fact that the fabrics of which the product is made are environmentally friendly. Its price is relatively inexpensive - about 800 rubles.
However, some parents are worried that such a side worsens the air circulation in the bed and leads to a decrease in the amount of oxygen.
Bed limiter Summer infant consumers also like it because it is very easy to assemble. Buyers also note the ability to push it down as an advantage. The main disadvantage of the product, according to reviews, is its high price.
Bed restraints Tomy, as well as the previous version, according to consumers is too high a price. However, users who purchased this product were not disappointed in the purchase. The presence of a pocket and the ability to fold the side down are considered by consumers as additional advantages.
Compact limiter size Babies appreciated by lovers to travel with the child from home to visit. The bright design is very popular with the kids, and their parents like the ability to quickly attach the limiter and quickly remove it.
You will learn about one of the most popular models of bed restraints from the following video.
